|
QC-CALC Real-Time is used to
collect and display measurement results from all CMMs, and Video CMMs,
and hand-held gages using QC-Gage without operator intervention. You can
create reports and export the data to spreadsheets, databases, and other
SPC Programs all automatically. This means you transfer data from all of
your measurement machines to any SPC package just by using a single
program!
This is the first software program to provide one interface for all
machines and one interface for all outputs. Our goal is to make your
data collection seamless no matter what equipment you purchase or what
SPC program your company uses as a standard. Use QC-CALC Real-Time to
print a minimal set of reports you want and/or save your data in any
format.
Product Brochure
|
Features: |
QC-CALC Real-Time Automatic Reporting
Real-Time Reporting allows you to manually or automatically
print the following reports to the screen, paper, or a file without
operator intervention:
- First Article - 1 Piece
- First Article - 5 Piece
- Stat Summary
- Raw Data
- Plot Report (shown below)
- Single-Part Gage Report (P/T Ratio)
- Multi-Part Gage Report (P/T Ratio)

|
QC-CALC Real-Time
Exporting
Real-Time Exporting allows you to manually or automatically
export data without operator intervention to the following formats:
- Access (all ver. including 2000)
- Excel (ver. 3, 4, 5, 7, 8, 97/2000)
- Lotus 1-2-3 (.wk1, .wk3)
- ASCII Text File
- Stat Summary file for use with software to adjust machine
offsets.
- Q-DAS
- VisualSPC
- DataPage
- Continually Adding SPC Output Formats

|
QC-CALC
Real-Time Trend Analysis & Sigma Zones
Use any of the Trend Analysis tests below to monitor your process and
have 1 or more actions trigger automatically (report, log file, assign
Cause or Corrective Action, or display the trend on the plot):
- Point Outside 3 Sigma
- Instability Tests
- Cp, Cpk Exceptions
- Drift Trend
- Stratification
- Mixtures
Trends are depicted as thick lines superimposed on the
plots as shown below.

Sigma
Zones on Plots
1, 2, and 3 Sigma zones can be represented on the plots using lines or
colored areas. Colored bands depict the Sigma zones in the picture below
and lines are used in the Trend Analysis picture above.

|
QC-CALC
Real-Time On-screen Features
QC-CALC Real-Time's on-screen features enable you to keep tabs on your
process with a single glance.

Clear Indicators for Status of Last Part
The background color of each plot indicates the condition of the last
part received for each dimension. A red plot
indicates the last point was out of specification (tolerance),
gray indicates out of control, and
green indicates the last point was in
control.
On-screen Plot Calculations
Choose to display the current Cpk, Cp, Cr, Average, or Range calculation
on each plot.
Point & Plot Properties
The Point Properties screen below shows details about the single
point the mouse is floating over and the Plot Properties screen
shows details for all the points displayed in the single plot the
mouse is floating over. The values in both of these windows will change
as the mouse moves over different points and plots. These properties
provide an instant view of your process yielding needed SPC calculations
without paper.

Trace
Fields
Extra non-measurement data can be automatically added from the Real-Time
Plots screen, stored in QC-CALC's Numeric or Text Factors, and viewed on
the Point Properties screen.
Assignable Causes and Corrective Actions
Assignable Causes and Corrective Actions are added by right-clicking on
a specific data point in a plot, then viewed on the Point Properties
screen.
On-Screen Editing of Data Values
- Allows re-inspection of features
- Allows deletion of records
|
There are many features that are
available in both QC-CALC SPC and QC-CALC Real-Time. Some of these
features are shown below.
Password Protection
The flexible options that make data collection so easy to use can be
password protected to eliminate accidental changes.
Language Support
Currently, QC-CALC is configurable to English, French, German, Italian,
Spanish, and Swedish.
Cpk vs. Ppk Display
View the AIAG Ppk value in place of the ASQ Cpk value throughout the
program and reports.
Custom Report Generation & Output
QC-CALC’s flexibility in data acquisition and charting
carries through to report generation and output capabilities. A complete
WYSIWYG report designer lets you create and edit your own report
templates to satisfy the most difficult reporting needs. For example,
you can:
- Define the types and contents of the reports to
be generated
- Generate reports with single or multiple graphs
per page
- Print reports in color for presentation quality
analysis and information
File Maintenance Utility
Add, remove, and reorder features, Factors, Assignable Causes, and
Corrective Actions in existing files.
Help for all Features
Get help for any feature within QC-CALC by hitting the F1 key.
|
There are currently no reviews of this
product.
Submit a Review
There are currently no questions about this
product.
Ask a Question
|
|