Order Number
|
Description
|
Height Stand with Swivel 2236687
|
A compact, convenient fixture with an
adjustable bracket to hold the Pocket Surf, anywhere within a 360°
rotation, for making measurements on a surface plate or on any suitable,
flat working surface. |
Compact Measuring Station EAS-2421
|
For measuring small parts with outside diameters up to
25mm/1in-includes PS-145 setting pin. |
Universal Stand EAS-2426
|
A heavy duty stand equipped with a adjustable bracket to hold the
Pocket Surf for measuring of work pieces, up to 213 mm / 8.375 in tall. |
Height Stand EAS-2496
|
A compact, convenient fixture with a bracket to hold the Pocket Surf
gage. Designed for making measurements on a granite surface plate
or on any suitable, flat working surface. |
Bottom Plate EAS-2584
|
For measuring work pieces too short (less then 85mm/3.5in long) for
the "closed" probe position; for work pieces with short O.D.'s from 6.35
mm/.25in (minimum 38mm/1.5 in long)
|
Vee-Adapter Kit EAS-2739
|
Attaches to bottom of Pocket Surf unit, permitting convenient,
hand-held measurements of hard-to-reach cylindrical surfaces, such as
crankshaft journals. Suitable for parts with diameters from 5.0 mm
/ .19 in to 125 mm / 5 in. |
Bore Adapter Kit EAS 2839
|
For time saving hand-held measurement of bores without having to fix
the workpiece. Accommodates all inside diameters from 25 mm/ 1 in
to 150 mm/ 6 in; depths from 25 mm/1 in to 60 mm/ 2.4 in.
|
Mounting Bracket EAS-3048
|
For mounting the Pocket Surf to most standard height gages.
The bracket includes a rectangular bar that is 11.5 mmx6.35 mm (0.45 in
x 0.25 in) to fit the holder of the height gage. A swivel feature
is included to permit the Pocket Surf to be set anywhere within a 360°
rotation.
|
General Purpose Probes EGH-1019
|
With a 90° conical diamond stylus, 10µm/.0004 in radius.
|
General Purpose Probes EGH-1019/EGH-1026
|
For most surface roughness applications
|
Transverse Chisel Probe
EGH-1020-W1 |
For gaging sharp edges or small O.D.'s where probe is aligned with
(180° or closed position) to axis of
traverse. 90° sapphire chisel, 10 µm/0004 in radius.
|
Parallel Chisel Probe EGH-1020-W2
|
For gaging sharp edges or small O.D's where probe is perpendicular
(in 90°- or 270° position) to axis of
traverse. Also for O.D.'s smaller than 6.35 mm/,/.25 in in staged on
EAS-2421 (Order no. 2008023). Vee fixture 90° sapphire chisel, 10
µm./.0004 in radius.
|
Small Bore Probe EGH-1021
|
With a 90° conical diamond stylus, 10
µm/.0004 in radius.
|
Small Bore Probe EGH-1021/EGH-1027
|
For gaging small bores (3.2 mm/.125 in minimum I.D.) up to a depth
of 19 mm/.74 in.
|
General Purpose Probes EGH-1026
|
With a 90° conical diamond stylus,
5µm/.0002 in radius.
|
Small Bore Probe EGH-1027
|
With a 90° conical diamond stylus, 5
µm/.0002 in radius. |
Groove Bottom Probe
EGH-1028 |
For measuring the bottom of grooves, recesses and small holes to
depths of 6.35 mm/.25 in. Also used for short lands and shoulders. 90°
conical diamond stylus, 10 µm/.0004 in radius.
|
