	TSTM-DC Advanced motorized torque test stand, 100 lbin, vertical, 110V
	TSTMH-DC Advanced motorized torque test stand, 100 lbin, horizontal, 110V

The TSTM-DC is an advanced motorized torque test stand offering all the mechanical specifications of the TSTM. The test stand is designed for a wide variety of application srequiring up to 100 lbFin of torque, including closure torque testing, fastener torque testing, and more. Modular design allows the stand to be configured for a variety of torque sensors and gripping fixtures while a lever-operated slider with travel stops makes engaging and disengaging samples quick and efficient. The stand includes a torque loading plate with tapped holes for grip and fixture mounting. Stepper motor design eliminate speed variation with load.

The TSTM-DC's controller adds a significant amount of sophistication, including integrated angle display and output, programmable cycling, auto return, overload protection, and other features.

FEATURES / SPECIFICATIONS:

Maximum torque: 100lbFin [11/3 Nm]
Speed range: 0.01-15 RPM [0.05-90°/s]
Speed accuracy: ±0.2% of setting, ±0% variation with load
Integrated angle indication with programmable travel limits
Maximum programmable travel limits: ±999,999.9º/±2,777.77 revolutions
Rotational travel accuracy: ±0.7º
Rotational travel repeatability: 0.1º
Rotational travel resolution: 0.1º
Universal power supplu: 80-250 VAC
Mounting holes for bench mounting
Base may be removed for alternative mounting
Grip/fixture mounting plate with 25 #10-32 threaded holes
Slider travel rate: 1.047" [26.6 mm] / lever rev
CE mark

Rotating torque plate has a matrix of tapped holes for grip or fixture mounting.

OPTIONAL HARDWARE:

Model BGI force/torque gage

Universal indicator for Mark-10 force and torque remote sensors. Mounts directly to the test stand.

Series STJ torque sensor

Mounts directly to the test stand. Capacities available from 10 ozFin to 100 lbFin

Multi-function cable, BGI gage to controller

Connects a Model BGI gage to the controller. This single cable is used to transmit set points, overload signals, and force data.

Serial cable, controller to PC

For communicationg with a PC for computer control. Also used to send torque and angle data to a PC.

Serial cable, gage to PC

Connects a Model BGI gage with a PC. Bypasses the controller.

CONTROLLER FEATURES:

Computer Control

A bi-directional RS-232 port is provided to interface with a PC. A command set is provided to allow for full control from a PC. The following are required with PC control:

Model BGI force/torque gage
09-1956 serial cable (see Optional Equipment)
09-1143 multi-function cable (see Optional Equipment)

Digital Angle Indication

Rotational travel is indicated in degrees or revolutions, with RS-232 output of angle data.

Programmable Angle Limits

The TSTM-DC can stop at or cycle between programmable upper and lower angle limits. Programmable in degrees or revolutions.

Overload Protection

Protects the torque sensor against overload (requires a Model BGI force/torque gage and 09-1143 multi-function cable). The user programs the desired percentage of full scale of the sensor.

Auto-return

The torque table rotates to an angle limit or torque set point (requires a Model BGI force/torque gage and 09-1143 cable), stops, and reverses direction at full speed to the other angle limit or torque set point.

Cycling / Dwell Time

Same as Auto-return, but with the ability to program the number of cycles up to 99,999 cycles. Dwell time allows the operator to program the length of time, up to 9,999.9 seconds, in 0.1 second intervals, for which the torque table pauses between cycles. Independent CW and CCW speeds may be programmed.

Programmable CW / CCW Button Functions

CW and CCW button operation can be configured in three user-configurable modes: Maintained: a short push produces continuous motion until STOP is pressed; Momentary: crosshead moves only while the button is pressed; Auto: short push produces maintained motion, while holding down the button will produce momentary motion.

Independent CW and CCW Speeds

Programmable independent speeds for clockwise and counterclockwise directions

Selectable Speed Units of Measurement (RPM and deg/s)
Password Protection

Prevents unauthorized changes to test parameters

Mark-10 Corporation Informational Brochure

There are currently no reviews of this product.
Submit a Review

There are currently no questions about this product.
Ask a Question

866-993-4011

service@measurenow.com

Returning Customer?

Shipping Policy Return Policy

Shopping Cart

The Shopping Cart is currently empty