Maximum sizes inspection:
Inside diameters capacity 450 mm
- Capacity
go up to 480 mm for flat parties with low weight
- Outside
diameters capacity 420 mm
Minimum sizes inspection:
MINI ID 45 mm with 3 contacts
points, ( standard contact shaft diameter 8 mm)
MINI ID 26 mm with 3 contacts
points, (small contact shaft diameter 5 mm + intermediary supports CSI
5 160 MBC)
MINI ID 30 mm with 2 contacts
points, ( standard contact shaft diameter 8 mm)
MINI ID 16 mm with 2 contacts
points, ( small contact shaft diameter 5 mm + intermediary supports CSI
5 160 MBC)
For OD in 2 points, it’s close to 0 mm
if you use C8 160 L ( Standard contacts)
For OD in 3 points, it’s close to 0 mm
if you use C08 160 08 L ( Standard contacts)
Thickness
of the support top table = 15.00 – 0 / -0.2 mm
Total
thickness: 91 mm
Total
weight with the 3 supports contacts without contact = 31 kgs
