DMT 160-JS

Description: 

The DMT -JS is a comparison instrument for checking dimensions relative to a master. The dimension is obtained: -for 2 point measurement by reading the maximum point determined during the travel of the part between the fixed and the sensitive contacts. -for 3 point measurement by reading the dimension on the indicator with the part in position between the 2 fixed pins and the sensitive contacts.

• Robust. Wide measuring range from the smallest possible measured dimension.
• Versatility. fine accuracy, repeatability;+/- .00008"(2 microns) threads and rapid checks +/- .00016 ( 4 microns).
• Fast adjustments.
• Simple, Quick measurement.
• Quick internal-external conversion.
• Adjustable measuring force.
• Possibility of very low measuring force for thin, wall parts.
• Possibility of direct dimension readout, by electronic column amplifier with LVDT. Mechanical dial indicator or digital electronic. Indicators with 8mm or .375" stem available.

Standard Accessories Included:

• Qty. 1-CST-8-160-SP60-To hold fixed pin for small- and medium-sized diamters.
• Qty. 1-CST-8-160L-Long fixed anvil support.
• Qty. 2-Fixed (half-moon) pins, used to lock contact holders in place.
• Qty. 2-C-8-160L-Anvils to measure ID-OD diameter.
• Qty. 1-C-8-160C-Anvils to measure ID-OD diameter.
• Qty. 1-CST-8-160C-MBC-Short holder for use with CSI-5-160-MBC 8mm-5mm adapters.
• Qty. 2-CSI-5-160-MBC-Intermediary supports to hold fixed and mobile anvils with 5 mm diameter.
• Qty. 2-C6-160L-Contacts for small diameters. Used with CSI-5-160-MBC. 
• Qty. 2-CCH-8-160L-Anvil for ID-OD.
• Shallow counter bore.
• Qty. 1-RC20-Extension for dial indicator.
• Plastic Case.
• Indicator sold separately.

• Two Year Warranty